STANDARD EQUIPMENT
AUXILIARY ENGINE: Kubota V2403-CR-TE48 Final Tier-4 turbocharged diesel liquid cooled; 4 cyl.; 148.5 CID; 56 HP @ 2100 RPM; Torque 140 ft. lb. @ 2100 RPM; includes fuel water separator, Donaldson PowerCore® air filter with pre-cleaner. Includes Kubota Standard Warranty coverage 2 years / 2000 hours.
ABRASION PROTECTION PACKAGE: Standard hopper screen; separator liner; pick-up head suction nozzle liner and pressure wear pads; heavy duty pressure and suction hoses
AUXILIARY ENGINE PROTECTION SYSTEM: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.
BACK-UP ALARM
BLUELOGIC® CONTROL SYSTEM: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab control to auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control System provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack. The display is pedestal mounted for improved visibility and includes hour meters (Trip and Total) for the auxiliary engine, pick-up head, blower, gutter brooms and water pump if applicable; sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide (if applicable) and On-Board diagnostics (OBD) for the aux engine and sweeper.
DUO SKIDS: Warranted for two years / 2000 hours prorated
DUST CONTROL SYSTEM: 150-gallon capacity translucent polyethylene water tank; 5 GPM electric diaphragm type pump; low water warning/indicator; spray nozzles at gutter broom and spray nozzle inside hopper, individually controlled; flexible 20 ft long water fill hose with 2-1/2” quick disconnect coupling; 3/4” garden hose fill connection
DUST SEPARATOR CLEANOUT PLUG EXTENSION HANDLE
GUTTER BROOM, LEFT, FLOODLIGHT & PARABOLIC MIRROR: Left side mounted 36” diameter steel vertical digger type; 10.5” parabolic mirror
HOPPER DRIP EDGE EXTENSION: Rubber belting extends horizontal reach 7 inches
HOPPER DOOR OPENING: Dimension 77-1/4” x 70” screen lifts with door
HOPPER INSPECTION DOOR
HOPPER SAFETY PROP: Integral with frame and hopper
HYDRAULIC SYSTEM FILTER RESTRICTION INDICATOR: External; mounted in filter manifold.
HYDRAULIC TANK SIGHT / TEMPERATURE GAUGE: External; mounted on tank.
LED ALTERNATING WARNING LIGHT SET: Rear mounted oval lights (2)
PRESSURE BLEEDER: Air pressure deflected out, allowing additional suction across front of pick-up head. Cable operated.
REAR BUMPER PADS
REAR MOUNTED WORK LIGHT
REVERSE PICK-UP HEAD SYSTEM: Assists in backing up with Pick-Up Head down.
REAR STORAGE COMPARTMENTS: Two rear storage compartments with a total 26.6 cubic foot capacity.
RUBBER LINED BLOWER: Warranty 1 Year / 1,000 Hours Prorated
435 STORAGE COMPARTMENTS: A modular design multi-chamber compartment with a combined 55 cubic foot protected storage capacity, accessible from left or right hand side through large gull wing doors; auxiliary engine and blower area is easily accessed through swing away side access panels.
SWEEPER WARRANTY: 1 year / 1,000 hours
OPTIONAL EQUIPMENT
AUXILIARY ENGINE / HYDRAULIC OPTIONS:
Auxiliary Hydraulic System: Electrically operated hydraulic system without auxiliary engine (for raising gutter broom, pick-up head and dumping hopper)
GUTTER BROOM OPTIONS:
Gutter Broom, Twin; Floodlights & Parabolic Mirrors: Left and right side mounted 36" diameter vertical steel digger type; 10.5" parabolic mirrors; brooms can operate simultaneously
(2) Gutter Broom - Drop Down: Allows gutter broom to drop down for road surface agitation in front of pick-up head
(2) Gutter Broom Tilt Adjuster: In cab control allows operator to manipulate pitch of vertical diggers to compensate for changing curb line depths/angles
DUST CONTROL SYSTEM OPTIONS:
(4) Additional Water Spray Nozzles: Switched Separately, Pick-up Head Nozzles
CAT 290 Water Pump (Exchange)
High Output Water System: Additional nozzles and deflectors strategically located to control extreme dust
Shop Air Purge: Facilitated purging dust control system during freezing conditions
BLOWER / HOPPER OPTIONS:
Dump Switch In Cab: Additional dump switch on control panel to activate dump operation
Hopper Deluge System: High volume system attaches to fire hydrant to flush hopper; includes quick disconnect fitting on nozzle
PICK-UP HEAD OPTIONS:
Auto Sweep Interrupt (ASI): System designed to interrupt sweeping functions when any of several parameters are met. When set in Auto mode, the transmission gear placed in reverse and the “ASI RESET” switch being engaged are two of several parameters that can engage ASO. Auto sequence of operations is as follows for equipped and active features: 1) Auxiliary engine is idled and gutter broom(s) are stopped. 2) Dust control system is turned off. 3) Left gutter broom is raised. 4) Right gutter broom is raised. 5) Pick-up head is raised. The “ASI RESET” switch will reposition all functions to prior setting(s) and can be used as a one button start/stop switch during sweeping to interrupt / resume all sweeping functions. Several ASI features are configurable and can be enables / disabled through the BlueLogic display under the PIN protected “User Setting” tab. Some of these features are: Overspeed Interrupt, when enabled, allows for a two-stage process to prevent sweeping at excessive speeds by warning the operator at a set configurable speed and then by activating ASI at a set configurable speed. Reverse Trigger Bypass, when enabled, will prevent ASI from activating when the transmission is placed in reverse. This allows ASI to be activated using other triggers such as engaging the ASI RESET switch for one button start / stop sweeping. RPM Return, when enabled, will allow SI to return the blower RPM to the previous stetting before ASI was activated.
Pick-Up Head Curtain Lifter: Hydraulic actuated and retractable roller assembly that provides the pick-up head with the ability to sweep large volume of light debris. Electrically controlled in cab
Pick-Up Head Pressure Inlet Water Injection System: Gravity flow water line connected to pick-up head pressure inlet. Cab controlled on/off solenoid valve; flow regulated by manual ball valve.
Removable Front Curtain Set
STAINLESS STEEL OPTIONS:
Stainless Steel Hopper (Exchange): For maximum corrosion and salt spray resistance, all interior and exterior hopper sheet surfaces to be fabricated with an industrial grade, non-magnetic, low carbon, high chromium stainless steel. The hopper, hopper door, skimmer hood and slide out screen assemblies are made of stainless steel and included in this option.
Stainless Steel Blower Housing (Exchange)
Stainless Steel Dust Separator (Exchange)
Stainless Steel Hopper Drain: Allows sweeper to operate in wet conditions by draining water picked up during sweeper operations; mounts on lower right quarter of hopper wall panel
Screen Upgrade - Stainless Steel Chip Seal / Milling Hopper Screen (Exchange with Standard Stainless Hopper Screen): 1/4" mesh high stainless steel woven wire for use in milling and chip seal applications
ADDITIONAL OPTIONS:
Auxiliary Fuse Panel: A +12VDC fused power source panel for any needed additional electrical components or accessories i.e. radios, warning lights, controls, etc. Standard on Freightliner conventional cab chassis.
*Included with Remote Controlled, Heated Mirrors
Camera/Monitor System: Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera. Right Curb view camera & Pick-up Head Camera.
TRUCK SPECIFICATIONS
CABOVER DIESEL TRUCK
Isuzu NQR (17,950 lb. GVW, 150” Wheelbase)
Engine: 4HK1-TC Diesel, 5.19L (317 CID), 215 HP
Transmission: Aisin, 6 Speed Automatic
TRUCK CHASSIS OPTIONS:
LED Traffic Directing Light (Arrow Stick): Whelen TACF85LH, SAE Class 1 (44" long)
(2) Parabolic Mirror Head (Exchange): 12" exchange with 10.5" head
Remote Controlled, Heated Mirrors: Both sides
