Web Analytics Made Easy - StatCounter

2022 TYMCO 600

 

STANDARD EQUIPMENT

Auxiliary Engine: John Deere diesel turbocharged 4045T Final Tier 4; 4 cylinder; 4.5 L (275 CID); 99 HP @ 2200 RPM; Torque 315 ft. lb. @ 1600 RPM; fuel/water separator, fuel filter; Donaldson PowerCore air filter with scavenged pre-filter; Remote oil filter; 3.8 useable gallon Diesel Exhaust Fluid (DEF) tank. Includes John Deere Standard Warranty coverage 2 Years / 2000 Hours and Extended Warranty coverage up to 5 Years / 5000 Hours, contact factory for details.

Amber Beacon Light - LED: SAE Class 1/California Title 13 compliant with protective limb guard.

Auxiliary Engine In-Cab Air Filter Restriction Indicator with Gauge: A filter restriction gauge included on the in-cab BlueLogic display with an audio and visual high restriction indicator.

Auxiliary Engine Protection System: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.

Auxiliary Fuse Panel: A 12V DC fused power source panel for any needed additional electrical components or accessories, i.e. radios, warning lights, controls, etc.

Back-Up Alarm

BlueLogic® Control System: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab controls to the auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control System provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack. The display is pedestal mounted for improved visibility and includes hour meters (Trip and Total) for the auxiliary engine, gutter brooms, pick-up head, blower, water pump, and BAH broom if applicable; sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide and On-Board Diagnostics (OBD) for the auxiliary engine and sweeper.

Duo Skids: Warranted for 2 Years / 2000 hours prorated

Dust Control System: 220 gallon capacity polyethylene water tank (Extra Water capacities available); 5 gpm electric diaphragm type pump; low water audible alarm and message on BlueLogic display; external water level indicator; spray nozzles around pick-up head, gutter broom(s) and inside hopper. Peterbilt 156”, Autocar 152” Diesel and Autocar 171” CNG chassis REQUIRES Extra Water Capacity (Refer to Dust Control Options Section).

Floodlights: Located on rear of sweeper (2)

Gutter Brooms, Twin; Floodlights and Parabolic Mirrors: Left and right side mounted 43" diameter wire filled digger type; adjustable floodlight for each gutter broom; 10.5" parabolic mirrors. Parabolic Mirrors N/A with Cabover Chassis.

Hydraulic System Protection: Hydraulic filter restriction indicator mounted in filter manifold; sight level gauge mounted on tank. BlueLogic control system continually monitors oil temperature.

LED Alternating Warning Light Set: Rear mounted oval lights (2).

Pressure Bleeder: Air pressure is deflected out, allowing additional suction across the front of pick-up head.

Reverse Pick-Up Head System: Assists in backing up with Pick-Up Head down

Rubber Lined Blower: Warranty: 1 year / 1,000 hours prorated

Water Fill Hose & Rack: Flexible 20 foot long water tank fill hose with 2-1/2 inch hydrant coupling with rack mount. System incorporates air gap.

Work Platform: Easily accessible work platform located between truck cab and sweeper. Standard equipment with conventional chassis with 165” WB and horizontal exhaust. Not available with Extra Water Capacity or Chassis Vertical Exhaust.

Sweeper Warranty: 1 Year / 1000 Hours. Contact factory for details.

 

OPTIONAL EQUIPMENT

 

GUTTER BROOM OPTIONS:

(2) Gutter Broom - Drop Down, Left & Right: Allows gutter broom to drop down for road surface agitation in front of pick-up head

(2) Gutter Broom Tilt Adjuster, Left & Right: In cab control allows operator to manipulate pitch agitation diggers to compensate for changing curb line depths/angles

Gutter Broom Variable Speed: Cab mounted controls for both left and right gutter broom speed

 

DUST CONTROL SYSTEM:

(3) Additional Water Spray Nozzles: Switched Separately

1.      Left Gutter Broom Nozzle

2.      Right Gutter Broom Nozzle

3.      Hopper Nozzle

Extra Water Capacity -330 Gallons – COMDEX: Compact Design Extra Water: Additional (1) 110 gallon water tank (total capacity of 330 gallons) located between chassis cab and sweeper. Includes a right side mounted tool storage box.

High Output Water System: Additional nozzles and deflectors strategically located to control extreme dust

Hydrant Wrench

Water Tank Level Gauge: Indicator on BLUELOGIC display

 

HOPPER OPTIONS:

Abrasion Protection Package: Standard hopper screen with hopper baffle curtains; protective hopper wall liners; pick-up head suction nozzle liner and pressure wear pads, heavy duty pressure hose (chip seal/milling operations require chip seal/milling hopper screen option)

Dump Switch in Cab: Additional dump switch on control panel to activate dump operation

Sweeper Deluge System: High volume system is mounted in the hopper with a water fill hose quick coupler for connection to a fire hydrant. Deluge port(s) on pick-up head pressure inlet (and BAH broom chamber if applicable). Connects to fire hydrant to flush pick-up head and includes 6"cleanout port

 

PICK-UP HEAD OPTIONS:

Auto Sweep Interrupt (ASI): System designed to interrupt sweeping functions when any of several parameters are met. When set in Auto mode, the transmission gear placed in reverse and the “ASI RESET” switch being engaged are two of several parameters that can engage ASO. Auto sequence of operations is as follows for equipped and active features: 1) Auxiliary engine is idled and gutter broom(s) are stopped. 2) Dust control system is turned off. 3) Left gutter broom is raised. 4) Right gutter broom is raised. 5) Pick-up head is raised. The “ASI RESET” switch will reposition all functions to prior setting(s) and can be used as a one button start/stop switch during sweeping to interrupt / resume all sweeping functions. Several ASI features are configurable and can be enables / disabled through the BlueLogic display under the PIN protected “User Setting” tab. Some of these features are: Overspeed Interrupt, when enabled, allows for a two-stage process to prevent sweeping at excessive speeds by warning the operator at a set configurable speed and then by activating ASI at a set configurable speed. Reverse Trigger Bypass, when enabled, will prevent ASI from activating when the transmission is placed in reverse. This allows ASI to be activated using other triggers such as engaging the ASI RESET switch for one button start / stop sweeping. RPM Return, when enabled, will allow ASI to return the blower RPM to the previous stetting before ASI was activated.

Broom Assist Pick-up Head (Exchange)

Pick-Up Head Curtain Lifter: Hydraulic actuated and retractable roller assembly that provides the pick-up

Pick-Up Head Pressure Inlet Water Injection System: Gravity flow water line connected to pick-up head pressure inlet. Cab controlled on/off solenoid valve; flow regulated by manual ball valve (includes 6" cleanout port)

Removable Front Curtain Set

Skid Bumper Extension Set (3")

 

AUXILIARY HAND HOSE OPTIONS:

Auxiliary Hand Hose with Catch Basin Cleaning Package - A.O.D. : Includes: 1) Auxiliary Hand Hose with Hydraulic Boom Assist; 2) Nozzle Extension (42” with quick disconnect); 3) A.O.D. (Air Operated Diaphragm) Water System: includes 3/4” X 25’ high volume wash down hose with hose box, small fire type nozzle, spray gun with trigger control and two (2) 36” interchangeable lance length.

 

STAINLESS STEEL OPTIONS:

Stainless Steel Hopper (Exchange): For maximum corrosion and salt spray resistance all interior hopper body sheet surfaces to be fabricated with an industrial, non-magnetic, low carbon, high chrome stainless steel. The hopper weldment, hopper door, hopper inspection doors, raker plate, high capacity dust separator and hopper screen are stainless and included in this option. Dust Separator Inlet Scroll and door liners are galvanized steel. Stainless Steel Bolt-On Blower Housing NOT included.

Stainless Steel Bolt-On Blower Housing (Exchange)

 

ADDITIONAL OPTIONS:

Camera/Monitor System: Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera. Two Camera System: Single rear view facing camera system with one (1) additional camera (2 cameras total). location for second camera: Pick-Up Head view from right side.

 

TRUCK SPECIFICATIONS

CONVENTIONAL DIESEL TRUCKS

2022 International 4300 / MV607 (31,000 lb. GVW, 165” Wheelbase)

Engine: 6.7L Cummins 200 HP Horizontal Exhaust

Transmission: Allison 2500RDS-P Automatic 6-speed

Dual Steering: Fontaine / Kaffenbarger Dual Steering Package

 

TRUCK CHASSBS OPTIONAL EQUIPMENT

Battery Disconnect Switch: Disconnects batteries for sweeper and truck, standard on Peterbilt and Autocar

Fire Extinguisher: Refillable, dry chemical, DOT approved, cab mounted, 5 lb. ABC rated

Hazard Reflectors: 3 triangular red reflectors

LED Light Bar: Amber, SAE Class 1, 56" long, cab mounted; Total Lights – 12

LED Traffic Directing Light (Arrow Stick): Whelen TACF85LH, SAE Class 1 (44" long)

(2) Inside Armrests

STANDARD EQUIPMENT

Auxiliary Engine: John Deere diesel turbocharged 4045T Final Tier 4; 4 cylinder; 4.5 L (275 CID); 99 HP @ 2200 RPM; Torque 315 ft. lb. @ 1600 RPM; fuel/water separator, fuel filter; Donaldson PowerCore air filter with scavenged pre-filter; Remote oil filter; 3.8 useable gallon Diesel Exhaust Fluid (DEF) tank. Includes John Deere Standard Warranty coverage 2 Years / 2000 Hours and Extended Warranty coverage up to 5 Years / 5000 Hours, contact factory for details.

Amber Beacon Light - LED: SAE Class 1/California Title 13 compliant with protective limb guard.

Auxiliary Engine In-Cab Air Filter Restriction Indicator with Gauge: A filter restriction gauge included on the in-cab BlueLogic display with an audio and visual high restriction indicator.

Auxiliary Engine Protection System: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.

Auxiliary Fuse Panel: A 12V DC fused power source panel for any needed additional electrical components or accessories, i.e. radios, warning lights, controls, etc.

Back-Up Alarm

BlueLogic® Control System: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab controls to the auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control System provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack. The display is pedestal mounted for improved visibility and includes hour meters (Trip and Total) for the auxiliary engine, gutter brooms, pick-up head, blower, water pump, and BAH broom if applicable; sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide and On-Board Diagnostics (OBD) for the auxiliary engine and sweeper.

Duo Skids: Warranted for 2 Years / 2000 hours prorated

Dust Control System: 220 gallon capacity polyethylene water tank (Extra Water capacities available); 5 gpm electric diaphragm type pump; low water audible alarm and message on BlueLogic display; external water level indicator; spray nozzles around pick-up head, gutter broom(s) and inside hopper. Peterbilt 156”, Autocar 152” Diesel and Autocar 171” CNG chassis REQUIRES Extra Water Capacity (Refer to Dust Control Options Section).

Floodlights: Located on rear of sweeper (2)

Gutter Brooms, Twin; Floodlights and Parabolic Mirrors: Left and right side mounted 43" diameter wire filled digger type; adjustable floodlight for each gutter broom; 10.5" parabolic mirrors. Parabolic Mirrors N/A with Cabover Chassis.

Hydraulic System Protection: Hydraulic filter restriction indicator mounted in filter manifold; sight level gauge mounted on tank. BlueLogic control system continually monitors oil temperature.

LED Alternating Warning Light Set: Rear mounted oval lights (2).

Pressure Bleeder: Air pressure is deflected out, allowing additional suction across the front of pick-up head.

Reverse Pick-Up Head System: Assists in backing up with Pick-Up Head down

Rubber Lined Blower: Warranty: 1 year / 1,000 hours prorated

Water Fill Hose & Rack: Flexible 20 foot long water tank fill hose with 2-1/2 inch hydrant coupling with rack mount. System incorporates air gap.

Work Platform: Easily accessible work platform located between truck cab and sweeper. Standard equipment with conventional chassis with 165” WB and horizontal exhaust. Not available with Extra Water Capacity or Chassis Vertical Exhaust.

Sweeper Warranty: 1 Year / 1000 Hours. Contact factory for details.

 

OPTIONAL EQUIPMENT

 

GUTTER BROOM OPTIONS:

(2) Gutter Broom - Drop Down, Left & Right: Allows gutter broom to drop down for road surface agitation in front of pick-up head

(2) Gutter Broom Tilt Adjuster, Left & Right: In cab control allows operator to manipulate pitch agitation diggers to compensate for changing curb line depths/angles

Gutter Broom Variable Speed: Cab mounted controls for both left and right gutter broom speed

 

DUST CONTROL SYSTEM:

(3) Additional Water Spray Nozzles: Switched Separately

1.      Left Gutter Broom Nozzle

2.      Right Gutter Broom Nozzle

3.      Hopper Nozzle

Extra Water Capacity -330 Gallons – COMDEX: Compact Design Extra Water: Additional (1) 110 gallon water tank (total capacity of 330 gallons) located between chassis cab and sweeper. Includes a right side mounted tool storage box.

High Output Water System: Additional nozzles and deflectors strategically located to control extreme dust

Hydrant Wrench

Water Tank Level Gauge: Indicator on BLUELOGIC display

 

HOPPER OPTIONS:

Abrasion Protection Package: Standard hopper screen with hopper baffle curtains; protective hopper wall liners; pick-up head suction nozzle liner and pressure wear pads, heavy duty pressure hose (chip seal/milling operations require chip seal/milling hopper screen option)

Dump Switch in Cab: Additional dump switch on control panel to activate dump operation

Sweeper Deluge System: High volume system is mounted in the hopper with a water fill hose quick coupler for connection to a fire hydrant. Deluge port(s) on pick-up head pressure inlet (and BAH broom chamber if applicable). Connects to fire hydrant to flush pick-up head and includes 6"cleanout port

 

PICK-UP HEAD OPTIONS:

Auto Sweep Interrupt (ASI): System designed to interrupt sweeping functions when any of several parameters are met. When set in Auto mode, the transmission gear placed in reverse and the “ASI RESET” switch being engaged are two of several parameters that can engage ASO. Auto sequence of operations is as follows for equipped and active features: 1) Auxiliary engine is idled and gutter broom(s) are stopped. 2) Dust control system is turned off. 3) Left gutter broom is raised. 4) Right gutter broom is raised. 5) Pick-up head is raised. The “ASI RESET” switch will reposition all functions to prior setting(s) and can be used as a one button start/stop switch during sweeping to interrupt / resume all sweeping functions. Several ASI features are configurable and can be enables / disabled through the BlueLogic display under the PIN protected “User Setting” tab. Some of these features are: Overspeed Interrupt, when enabled, allows for a two-stage process to prevent sweeping at excessive speeds by warning the operator at a set configurable speed and then by activating ASI at a set configurable speed. Reverse Trigger Bypass, when enabled, will prevent ASI from activating when the transmission is placed in reverse. This allows ASI to be activated using other triggers such as engaging the ASI RESET switch for one button start / stop sweeping. RPM Return, when enabled, will allow ASI to return the blower RPM to the previous stetting before ASI was activated.

Broom Assist Pick-up Head (Exchange)

Pick-Up Head Curtain Lifter: Hydraulic actuated and retractable roller assembly that provides the pick-up

Pick-Up Head Pressure Inlet Water Injection System: Gravity flow water line connected to pick-up head pressure inlet. Cab controlled on/off solenoid valve; flow regulated by manual ball valve (includes 6" cleanout port)

Removable Front Curtain Set

Skid Bumper Extension Set (3")

 

AUXILIARY HAND HOSE OPTIONS:

Auxiliary Hand Hose with Catch Basin Cleaning Package - A.O.D. : Includes: 1) Auxiliary Hand Hose with Hydraulic Boom Assist; 2) Nozzle Extension (42” with quick disconnect); 3) A.O.D. (Air Operated Diaphragm) Water System: includes 3/4” X 25’ high volume wash down hose with hose box, small fire type nozzle, spray gun with trigger control and two (2) 36” interchangeable lance length.

 

STAINLESS STEEL OPTIONS:

Stainless Steel Hopper (Exchange): For maximum corrosion and salt spray resistance all interior hopper body sheet surfaces to be fabricated with an industrial, non-magnetic, low carbon, high chrome stainless steel. The hopper weldment, hopper door, hopper inspection doors, raker plate, high capacity dust separator and hopper screen are stainless and included in this option. Dust Separator Inlet Scroll and door liners are galvanized steel. Stainless Steel Bolt-On Blower Housing NOT included.

Stainless Steel Bolt-On Blower Housing (Exchange)

 

ADDITIONAL OPTIONS:

Camera/Monitor System: Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera. Two Camera System: Single rear view facing camera system with one (1) additional camera (2 cameras total). location for second camera: Pick-Up Head view from right side.

 

TRUCK SPECIFICATIONS

CONVENTIONAL DIESEL TRUCKS

2022 International 4300 / MV607 (31,000 lb. GVW, 165” Wheelbase)

Engine: 6.7L Cummins 200 HP Horizontal Exhaust

Transmission: Allison 2500RDS-P Automatic 6-speed

Dual Steering: Fontaine / Kaffenbarger Dual Steering Package

 

TRUCK CHASSBS OPTIONAL EQUIPMENT

Battery Disconnect Switch: Disconnects batteries for sweeper and truck, standard on Peterbilt and Autocar

Fire Extinguisher: Refillable, dry chemical, DOT approved, cab mounted, 5 lb. ABC rated

Hazard Reflectors: 3 triangular red reflectors

LED Light Bar: Amber, SAE Class 1, 56" long, cab mounted; Total Lights – 12

LED Traffic Directing Light (Arrow Stick): Whelen TACF85LH, SAE Class 1 (44" long)

(2) Inside Armrests