2019 TYMCO 435

Miles: 847
Chassis Hours: 7
 

STANDARD EQUIPMENT:

AUXILIARY ENGINE: Kubota V2403-CR-TE48 Final Tier-4 turbocharged diesel liquid cooled; 4 cyl.; 148.5 CID; 56 HP @ 2100 RPM; Torque 140 ft. lb. @ 2100 RPM; includes fuel water separator, Donaldson PowerCore® air filter with pre-cleaner

AUXILIARY ENGINE PROTECTION SYSTEM: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.

ABRASION PROTECTION PACKAGE: Standard hopper screen; separator liner; pick-up head suction nozzle liner and pressure wear pads; heavy duty pressure and suction hoses.

BLUELOGIC® CONTROL SYSTEM: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab controls to the auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack on the control console. The display is pedestal mounted for improved visibility and includes hour meter (Trip and Total) for the auxiliary engine, gutter brooms, pick-up head, blower, water pump, & BAH broom, if applicable; dump cycle counter, sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide, and On-Board Diagnostics (OBD) for the auxiliary engine and sweeper.

DUST CONTROL SYSTEM: 150-gallon capacity translucent polyethylene water tank; 5 gpm electric diaphragm type pump; low water warning light; spray nozzles at gutter broom and inside hopper, individually controlled; flexible 20-foot long water fill hose with 2-1/2" quick disconnect coupling.

DUST SEPARATOR CLEANOUT PLUG EXTENSION HANDLE

HOPPER DRIP EDGE EXTENSION: Rubber belting extends horizontal reach 7 inches

HOPPER INSPECTION DOOR

HOPPER SAFETY PROP: Integral with frame and hopper

HYDRAULIC SYSTEM FILTER RESTRICTION INDICATOR: External; mounted in filter manifold.

HYDRAULIC TANK SIGHT/TEMPERATURE GAUGE: External; mounted on tank.

435 STORAGE COMPARTMENTS: A modular design multi-chamber compartment with a combined 55 cubic foot protected storage capacity, accessible from left- or right-hand side through large gull wing doors; auxiliary engine and blower area is easily accessed through swing away side access panels.

REAR STORAGE COMPARTMENTS: Two rear storage compartments with a total 26.6 cubic foot capacity.

PRESSURE BLEEDER: Air pressure deflected out, allowing additional suction across front of pick-up head. Cable operated.

BACK-UP ALARM

DUO SKIDS, warranted for two years/2000 hours prorated.

REAR BUMPER PADS

REAR MOUNTED OVAL DESIGN ALTERNATING/FLASHING WARNING LIGHTS (2) LED

REAR MOUNTED WORKLIGHT (1)

REVERSE PICK-UP HEAD SYSTEM: Assists in backing up with Pick-Up Head down.

RUBBER LINED BLOWER

HOPPER DOOR OPENING DIMENSION 77-1/4" X 70", SCREEN LIFTS WITH DOOR

 

GUTTER BROOM OPTIONS:

Gutter Broom, Twin; Floodlights & Parabolic Mirrors: Left and right side mounted 36" diameter vertical steel digger type; 10.5" parabolic mirrors; brooms can operate simultaneously

(2) Gutter Broom - Drop Down: Allows gutter broom to drop down for road surface agitation in front of pick-up head [REQUIRES GUTTER BROOM TILT ADJUSTER]

(2) Gutter Broom Tilt Adjuster: In cab control allows operator to manipulate pitch of vertical diggers to compensate for changing curb line depths/angles

 

DUST CONTROL SYSTEM OPTIONS:

(4) Additional Pick up Head Nozzles

CAT 290 Water Pump (exchange with standard)

High Output Water System: Additional nozzles strategically located to control extreme dust (N/A WITH LOW EMISSION PACKAGE)

 

BLOWER / HOPPER OPTIONS:

Dump Switch In Cab: Additional dump switch on control panel to activate dump operation

Hopper Deluge System: High volume system attaches to fire hydrant to flush hopper; includes quick disconnect fitting on nozzle

 

PICK-UP HEAD OPTIONS:

Pick-Up Head Curtain Lifter: Hydraulic actuated and retractable roller assembly that provides the pick-up head with the ability to sweep large volume of light debris. Electrically controlled in cab

Removable Front Curtain Set

 

STAINLESS STEEL OPTIONS:

Stainless Steel Hopper: For maximum corrosion and salt spray resistance, all interior and exterior hopper sheet surfaces to be fabricated with an industrial grade, non-magnetic, low carbon, high chrome stainless steel. The hopper, hopper door, skimmer hood and screen assemblies, inspection door and suction inlet tube are made of stainless steel and included in this option. (exchange with standard)

Screen Upgrade - Stainless Steel Hopper:

SS Chip Seal/Milling Hopper Screen: 1/4" mesh stainless steel woven wire, for use in milling and chip seal applications (exchange with stainless hopper screen)

Stainless Steel Blower Housing: Corrosive and abrasion resistant plate made from 10 gauge (exchange with standard)

Stainless Steel Dust Separator (exchange with standard)

Stainless Steel Hopper Drain: Allows sweeper to operate in wet conditions by draining water picked up during sweeper operations; mounts on lower right quarter of hopper wall panel

 

ADDITIONAL OPTIONS:

Auxiliary Fuse Panel: A +12VDC fused power source panel for any needed additional electrical components or accessories i.e. radios, warning lights, controls, etc. Included with Remote Controlled, Heated Mirrors (standard on Freightliner conventional cab chassis)

Auxiliary Hydraulic System: Electrically operates hydraulic system without auxiliary engine (for raising gutter broom, pick-up head and dumping hopper)

Camera/Monitor System: Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera

Single rear view camera system with one (1) additional camera (2 cameras total)

 

DIESEL TRUCK SPECIFICATIONS:

STANDARD CABOVER DIESEL TRUCK: Isuzu NQR (17,950 lb GVW)

ENGINE: 4HK1-TC Diesel, 5.2L (317 CID); 215 HP.

TRANSMISSION: Aisin, 6 speed automatic

FRONT AXLE: 6,830 lb.

REAR AXLE: 14,550 1b.                                         

REAR SUSPENSION: 14,550 lb.

 

TRUCK CHASSIS OPTIONAL EQUIPMENT:

(2) Parabolic Mirror Heads: 12" (exchange with 10.5" head) each

Traffic Directing Light (Arrow Stick) - LED: Whelen TACF85LH, SAE Class 1 (44" long)

 

STANDARD EQUIPMENT:

AUXILIARY ENGINE: Kubota V2403-CR-TE48 Final Tier-4 turbocharged diesel liquid cooled; 4 cyl.; 148.5 CID; 56 HP @ 2100 RPM; Torque 140 ft. lb. @ 2100 RPM; includes fuel water separator, Donaldson PowerCore® air filter with pre-cleaner

AUXILIARY ENGINE PROTECTION SYSTEM: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.

ABRASION PROTECTION PACKAGE: Standard hopper screen; separator liner; pick-up head suction nozzle liner and pressure wear pads; heavy duty pressure and suction hoses.

BLUELOGIC® CONTROL SYSTEM: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab controls to the auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack on the control console. The display is pedestal mounted for improved visibility and includes hour meter (Trip and Total) for the auxiliary engine, gutter brooms, pick-up head, blower, water pump, & BAH broom, if applicable; dump cycle counter, sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide, and On-Board Diagnostics (OBD) for the auxiliary engine and sweeper.

DUST CONTROL SYSTEM: 150-gallon capacity translucent polyethylene water tank; 5 gpm electric diaphragm type pump; low water warning light; spray nozzles at gutter broom and inside hopper, individually controlled; flexible 20-foot long water fill hose with 2-1/2" quick disconnect coupling.

DUST SEPARATOR CLEANOUT PLUG EXTENSION HANDLE

HOPPER DRIP EDGE EXTENSION: Rubber belting extends horizontal reach 7 inches

HOPPER INSPECTION DOOR

HOPPER SAFETY PROP: Integral with frame and hopper

HYDRAULIC SYSTEM FILTER RESTRICTION INDICATOR: External; mounted in filter manifold.

HYDRAULIC TANK SIGHT/TEMPERATURE GAUGE: External; mounted on tank.

435 STORAGE COMPARTMENTS: A modular design multi-chamber compartment with a combined 55 cubic foot protected storage capacity, accessible from left- or right-hand side through large gull wing doors; auxiliary engine and blower area is easily accessed through swing away side access panels.

REAR STORAGE COMPARTMENTS: Two rear storage compartments with a total 26.6 cubic foot capacity.

PRESSURE BLEEDER: Air pressure deflected out, allowing additional suction across front of pick-up head. Cable operated.

BACK-UP ALARM

DUO SKIDS, warranted for two years/2000 hours prorated.

REAR BUMPER PADS

REAR MOUNTED OVAL DESIGN ALTERNATING/FLASHING WARNING LIGHTS (2) LED

REAR MOUNTED WORKLIGHT (1)

REVERSE PICK-UP HEAD SYSTEM: Assists in backing up with Pick-Up Head down.

RUBBER LINED BLOWER

HOPPER DOOR OPENING DIMENSION 77-1/4" X 70", SCREEN LIFTS WITH DOOR

 

GUTTER BROOM OPTIONS:

Gutter Broom, Twin; Floodlights & Parabolic Mirrors: Left and right side mounted 36" diameter vertical steel digger type; 10.5" parabolic mirrors; brooms can operate simultaneously

(2) Gutter Broom - Drop Down: Allows gutter broom to drop down for road surface agitation in front of pick-up head [REQUIRES GUTTER BROOM TILT ADJUSTER]

(2) Gutter Broom Tilt Adjuster: In cab control allows operator to manipulate pitch of vertical diggers to compensate for changing curb line depths/angles

 

DUST CONTROL SYSTEM OPTIONS:

(4) Additional Pick up Head Nozzles

CAT 290 Water Pump (exchange with standard)

High Output Water System: Additional nozzles strategically located to control extreme dust (N/A WITH LOW EMISSION PACKAGE)

 

BLOWER / HOPPER OPTIONS:

Dump Switch In Cab: Additional dump switch on control panel to activate dump operation

Hopper Deluge System: High volume system attaches to fire hydrant to flush hopper; includes quick disconnect fitting on nozzle

 

PICK-UP HEAD OPTIONS:

Pick-Up Head Curtain Lifter: Hydraulic actuated and retractable roller assembly that provides the pick-up head with the ability to sweep large volume of light debris. Electrically controlled in cab

Removable Front Curtain Set

 

STAINLESS STEEL OPTIONS:

Stainless Steel Hopper: For maximum corrosion and salt spray resistance, all interior and exterior hopper sheet surfaces to be fabricated with an industrial grade, non-magnetic, low carbon, high chrome stainless steel. The hopper, hopper door, skimmer hood and screen assemblies, inspection door and suction inlet tube are made of stainless steel and included in this option. (exchange with standard)

Screen Upgrade - Stainless Steel Hopper:

SS Chip Seal/Milling Hopper Screen: 1/4" mesh stainless steel woven wire, for use in milling and chip seal applications (exchange with stainless hopper screen)

Stainless Steel Blower Housing: Corrosive and abrasion resistant plate made from 10 gauge (exchange with standard)

Stainless Steel Dust Separator (exchange with standard)

Stainless Steel Hopper Drain: Allows sweeper to operate in wet conditions by draining water picked up during sweeper operations; mounts on lower right quarter of hopper wall panel

 

ADDITIONAL OPTIONS:

Auxiliary Fuse Panel: A +12VDC fused power source panel for any needed additional electrical components or accessories i.e. radios, warning lights, controls, etc. Included with Remote Controlled, Heated Mirrors (standard on Freightliner conventional cab chassis)

Auxiliary Hydraulic System: Electrically operates hydraulic system without auxiliary engine (for raising gutter broom, pick-up head and dumping hopper)

Camera/Monitor System: Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera

Single rear view camera system with one (1) additional camera (2 cameras total)

 

DIESEL TRUCK SPECIFICATIONS:

STANDARD CABOVER DIESEL TRUCK: Isuzu NQR (17,950 lb GVW)

ENGINE: 4HK1-TC Diesel, 5.2L (317 CID); 215 HP.

TRANSMISSION: Aisin, 6 speed automatic

FRONT AXLE: 6,830 lb.

REAR AXLE: 14,550 1b.                                         

REAR SUSPENSION: 14,550 lb.

 

TRUCK CHASSIS OPTIONAL EQUIPMENT:

(2) Parabolic Mirror Heads: 12" (exchange with 10.5" head) each

Traffic Directing Light (Arrow Stick) - LED: Whelen TACF85LH, SAE Class 1 (44" long)