Web Analytics Made Easy - StatCounter

2021 TYMCO 500X

Miles: 178
Chassis Hours: 17
 

STANDARD EQUIPMENT

AUXILIARY ENGINE: John Deere diesel turbocharged 4045T Final Tier 4; 4 cyl.; 4.5 L (275 CID); 115 HP @ 2200 RPM; Torque 373 ft. lb. @ 1500 RPM; Donaldson PowerCore air filter with restriction indicator in cab, fuel/water separator, fuel filter; intake heater; 3.8 useable gallon Diesel Exhaust Fluid (DEF) tank. Includes John Deere Standard Warranty coverage 2 Years / 2000 Hours and Extended Warranty coverage up to 5 years / 5000 hours, contact factory for details.

AMBER BEACON LIGHT - LED: SAE Class 1 /California Title 13 compliant with protective limb guard.

AUXILIARY ENGINE IN-CAB AIR FILTER RESTRICTION INDICATOR WITH GAUGE: A filter restriction gauge included on the in-cab BlueLogic display with an audio and visual high restriction indicator.

AUXILIARY ENGINE PROTECTION SYSTEM: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.

AUXILIARY FUSE PANEL: A 12V DC fused power source panel for any needed additional electrical components or accessories, i.e. radios, warning lights, controls, etc.

AUXILIARY HYDRAULIC SYSTEM: Electrically operates hydraulic system (except hopper lift) without auxiliary engine running.

BACK-UP ALARM

BLUELOGIC CONTROL SYSTEM: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab controls to the auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack on the control console. The display is pedertal mounted for improved visibility and includes hour meter (Trip and Total) for the auxiliary engine, gutter brooms, pick-up head, blower, water pump, & BAH broom, if applicable; dump cycle counter, sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide, and On-Board Diagnostics (OBD) for the auxiliary engine and sweeper.

BOLT-ON SUCTION TRANSITION

BROOM ASSIST PICK-UP HEAD WITH DUO SKIDS: Duo skids warranted for 2 years / 2000 hours.

DUST CONTROL SYSTEM: 250-gallon capacity polyethylene water tanks; 5 GPM electric diaphragm type pump; low water audible alarm and message on BlueLogic display; spray nozzles around pick-up head, gutter broom(s) and inside hopper.

DUST SEPARATOR CLEANOUT TOOL: Foldable for storage.

FLOODLIGHTS: Rear (2), Right Side Hopper Suction Chute (1)

GUTTER BROOMS, TWIN, FLOODLIGHTS, TILT ADJUSTERS & VARIABLE SPEED: Left and right side mounted 43" diameter wire filled digger type, adjustable floodlight each gutter broom, 10.5" parabolic mirrors on front fender extensions. Variable speed control for each gutter broom is located on center mount console. Each broom shall have a hydraulic actuated tilt capacity of 27 degrees operated from inside cab. Cab mounted controls for both left and right gutter broom speed.

HOPPER/ HIGH CAPACITY DUST SEPARATOR: Fabricated with an industrial, non-magnetic, low carbon, high chrome stainless steel. Hopper has an infinitely variable dump height from 24 inches to 132 inches. A large hydraulically locked hopper door (68 inches wide by 57 inches tall) has two (2) additional mechanical cam locks for air and water tight operation. Discharge chute (72 inches wide and 48 inches long) has a minimum reach of 22 inches eliminates the need of a side shift. Safety props provided for Dump Door/Tilt Cylinders – two (2) total.

HOPPER DRAIN SYSTEM: Drains water picked up during sweeper operation.

HOPPER LIFT: Two-stage scissor lift with lift capacity of 10,000 pounds. Scissor mechanism actuated by two (2) double acting hydraulic cylinders with integral counterbalance holding valves. Safety props provided. Left and right stabilizers automatically deploy before hopper begins dump cycle. Non-greaseable design.

HYDRAULIC SYSTEM: Includes a 34-gallon reservoir; sight level/temperature gauge, triple suction line strainers; replaceable 10-micron spin-on tank filler/vent port filter; a 3-micron absolute in-line return filter with restriction indicator in cab, oil temperature and level monitored by BlueLogic control system.

PRESSURE BLEEDER: Air pressure is deflected out allowing additional suction across the front of pick-up head. Cable Operated.

REVERSE PICK-UP HEAD SYSTEM: Allows unit to back up without damage to pick-up head

RUBBER LINED BLOWER: Driven using a fixed displacement heavy-duty hydraulic motor. Blower housing includes Tilt-N-Seal design with adjustable spring balance to ensure long life of seal. Warranty – 1 year / 1000 hours prorated.

SHOP PROP: Scissor lift safety prop designed for use in areas requiring approximately 15' of overhead clearance (on-board safety props require approximately 20' of overhead clearance).

STORAGE COMPARTMENT: 5.6 cubic feet with lockable door mounted on left side.

WATER FILL HOSE & RACK: Flexible 20-foot-long water tank fill hose with 2-1/2-inch hydrant coupling with rack mount. System incorporates air gap.

SWEEPER WARRANTY: 1 Year / 1000 Hours. Contact factory for details.

 

OPTIONAL EQUIPMENT

 

GUTTER BROOM OPTIONS:

(2) Gutter Broom Drop Down: Allows gutter broom to drop down for road surface agitation in front of pick-up head

 

DUST CONTROL SYSTEM:

(3) Additional Water Spray Nozzles: 1. Left Gutter Broom Nozzle, 2. Right Gutter Broom Nozzle, 3. Hopper Nozzle

A.O.D. (Air Operated Diaphragm) Water Pump with Wash Down Hose & Gun (Exchange):  Self-contained water supply includes single A.O.D. pump used for dust control and wash down independent from auxiliary engine with 3/4" x 25' high volume wash down hose with hose box, small fire type nozzle, spray gun with trigger control and two (2) 36" interchangeable lance lengths; Recommended for catch basin cleaning and remote washing of unit.

High Output Water: Additional nozzles and deflectors strategically located to control extreme dust

Hydrant Wrench

Water Tank Level Gauge: Indicator on BlueLogic display

 

HOPPER OPTIONS

Abrasion Protection Package: Hopper suction inlet liner; hopper suction tube liner; suction transition liner; extra heavy duty (red label) suction hose; pick-up head suction nozzle liner and pressure wear pads

External Hopper Controls: Four (4) toggle switches, located behind the access panel on the right rear of the engine compartment, used to operate the hopper during washout and service procedures. These switches individually control Engine Start/Stop, Blower RPM, Hopper Up and Down, and Hopper Tilt/Open. *These controls should NOT be used for dumping the sweeper, only cleaning and service. Always use the controls inside the cab when dumping in a container / truck or on the ground.

Hopper Load Indicators: Sensor with audible and visual indicators in cab that signals full load

Hopper Screen Vibrators - Dual: For heavy sweeping/milling application (pneumatic)

Hopper Vibrator - Electric: Attached to hopper weldment to assist dumping

Sweeper Deluge System: High volume system is mounted in the hopper with a water fill hose quick coupler for connection to a fire hydrant. Deluge port(s) on pick-up head pressure inlet (and BAH broom chamber if applicable). Connects to fire hydrant to flush pick-up head and includes 6"cleanout port.

 

PICK-UP HEAD OPTIONS:

Auto Sweep Interrupt (ASI): System designed to interrupt sweeping functions when any of several parameters are met. When set in Auto mode, the transmission gear placed in reverse and the “ASI RESET” switch being engaged are two of several parameters that can engage ASO. Auto sequence of operations is as follows for equipped and active features: 1) Auxiliary engine is idled and gutter broom(s) are stopped. 2) Dust control system is turned off. 3) Left gutter broom is raised. 4) Right gutter broom is raised. 5) Pick-up head is raised. The “ASI RESET” switch will reposition all functions to prior setting(s) and can be used as a one button start/stop switch during sweeping to interrupt / resume all sweeping functions. Several ASI features are configurable and can be enables / disabled through the BlueLogic display under the PIN protected “User Setting” tab. Some of these features are:

Overspeed Interrupt, when enabled, allows for a two-stage process to prevent sweeping at excessive speeds by warning the operator at a set configurable speed and then by activating ASI at a set configurable speed.

Reverse Trigger Bypass, when enabled, will prevent ASI from activating when the transmission is placed in reverse. This allows ASI to be activated using other triggers such as engaging the ASI RESET switch for one button start / stop sweeping.

RPM Return, when enabled, will allow ASI to return the blower RPM to the previous stetting before ASI was activated.

Pick-Up Head Curtain Lifter: Hydraulic actuated & retractable roller assembly that provides the pick-up head w/ the ability to sweep large volume of light debris. Electrically controlled in cab

Pick-Up Head Pressure Inlet Water Injection System: Gravity flow water line connected to pick-up head pressure inlet. Cab controlled on/off solenoid valve; flow regulated by manual ball valve (includes 6" cleanout port)

Removable Front Curtain Set

Skid Bumper Extension Set (3")

 

ADDITIONAL OPTIONS:

Camera/Monitor System (Three Options Below): Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera. Three Camera System: Single rear view facing camera system with two (2) additional cameras (3 cameras total). Location for second and third cameras: Pick-Up Head view from right side and Pick-Up Head view from left.

(5) Floodlight - LED (Exchange): (2) Gutter Brooms, (2) Rear, (1) Chute

(2) Floodlight - LED (Additional): (2) Pick-up Head (each side)

 

TRUCK SPECIFICATIONS

CONVENTIONAL DIESEL TRUCK

Freightliner M2-106 (33,000 lb. GVW, 158” Wheelbase)

Engine: 6.7L Cummins 200 HP Horizontal Exhaust

Transmission: Allison 2500RDS-P Automatic 6-speed

Dual Steering: Fontaine Dual Steering Package

Rear Suspension: 23,000 lb. Hendrickson (HAS 230 Air)

 

TRUCK CHASSIS OPTIONAL EQUIPMENT

Air Horn: Tied into the electric horn and mounted under the cab

Battery Disconnect Switch: Disconnects batteries for sweeper and truck.

Fire Extinguisher: Refillable, dry chemical, DOT approved, cab mounted, 5 lb. ABC rated

Hazard Reflectors: 3 triangular red reflectors

LED Traffic Directing Light (Arrow Stick): Whelen TACF85LH, SAE Class 1 (44" long)

(2)Parabolic Mirror Head (Exchange): 12" exchange with 10.5" head

(2) Inside Arm Rests

2 Speed Rear Axle

​​​​​​​

STANDARD EQUIPMENT

AUXILIARY ENGINE: John Deere diesel turbocharged 4045T Final Tier 4; 4 cyl.; 4.5 L (275 CID); 115 HP @ 2200 RPM; Torque 373 ft. lb. @ 1500 RPM; Donaldson PowerCore air filter with restriction indicator in cab, fuel/water separator, fuel filter; intake heater; 3.8 useable gallon Diesel Exhaust Fluid (DEF) tank. Includes John Deere Standard Warranty coverage 2 Years / 2000 Hours and Extended Warranty coverage up to 5 years / 5000 hours, contact factory for details.

AMBER BEACON LIGHT - LED: SAE Class 1 /California Title 13 compliant with protective limb guard.

AUXILIARY ENGINE IN-CAB AIR FILTER RESTRICTION INDICATOR WITH GAUGE: A filter restriction gauge included on the in-cab BlueLogic display with an audio and visual high restriction indicator.

AUXILIARY ENGINE PROTECTION SYSTEM: Engine ECU to provide automatic engine monitoring with derate or shutdown when engine problem is detected such as high coolant temperature or low oil pressure.

AUXILIARY FUSE PANEL: A 12V DC fused power source panel for any needed additional electrical components or accessories, i.e. radios, warning lights, controls, etc.

AUXILIARY HYDRAULIC SYSTEM: Electrically operates hydraulic system (except hopper lift) without auxiliary engine running.

BACK-UP ALARM

BLUELOGIC CONTROL SYSTEM: Multiplexed electrical system includes hardware and TYMCO designed software that integrates the in-cab controls to the auxiliary engine and all sweeper functions; as well as provides intelligent safety features. The BlueLogic Control provides sweeper and auxiliary engine data to the operator through the touchscreen display and the multiplexed switch pack on the control console. The display is pedertal mounted for improved visibility and includes hour meter (Trip and Total) for the auxiliary engine, gutter brooms, pick-up head, blower, water pump, & BAH broom, if applicable; dump cycle counter, sweeper odometer (records curb miles swept and sweeping hours), service reminders, custom reminders, overspeed warning, low water audible alarm, dust control system winterization guide, and On-Board Diagnostics (OBD) for the auxiliary engine and sweeper.

BOLT-ON SUCTION TRANSITION

BROOM ASSIST PICK-UP HEAD WITH DUO SKIDS: Duo skids warranted for 2 years / 2000 hours.

DUST CONTROL SYSTEM: 250-gallon capacity polyethylene water tanks; 5 GPM electric diaphragm type pump; low water audible alarm and message on BlueLogic display; spray nozzles around pick-up head, gutter broom(s) and inside hopper.

DUST SEPARATOR CLEANOUT TOOL: Foldable for storage.

FLOODLIGHTS: Rear (2), Right Side Hopper Suction Chute (1)

GUTTER BROOMS, TWIN, FLOODLIGHTS, TILT ADJUSTERS & VARIABLE SPEED: Left and right side mounted 43" diameter wire filled digger type, adjustable floodlight each gutter broom, 10.5" parabolic mirrors on front fender extensions. Variable speed control for each gutter broom is located on center mount console. Each broom shall have a hydraulic actuated tilt capacity of 27 degrees operated from inside cab. Cab mounted controls for both left and right gutter broom speed.

HOPPER/ HIGH CAPACITY DUST SEPARATOR: Fabricated with an industrial, non-magnetic, low carbon, high chrome stainless steel. Hopper has an infinitely variable dump height from 24 inches to 132 inches. A large hydraulically locked hopper door (68 inches wide by 57 inches tall) has two (2) additional mechanical cam locks for air and water tight operation. Discharge chute (72 inches wide and 48 inches long) has a minimum reach of 22 inches eliminates the need of a side shift. Safety props provided for Dump Door/Tilt Cylinders – two (2) total.

HOPPER DRAIN SYSTEM: Drains water picked up during sweeper operation.

HOPPER LIFT: Two-stage scissor lift with lift capacity of 10,000 pounds. Scissor mechanism actuated by two (2) double acting hydraulic cylinders with integral counterbalance holding valves. Safety props provided. Left and right stabilizers automatically deploy before hopper begins dump cycle. Non-greaseable design.

HYDRAULIC SYSTEM: Includes a 34-gallon reservoir; sight level/temperature gauge, triple suction line strainers; replaceable 10-micron spin-on tank filler/vent port filter; a 3-micron absolute in-line return filter with restriction indicator in cab, oil temperature and level monitored by BlueLogic control system.

PRESSURE BLEEDER: Air pressure is deflected out allowing additional suction across the front of pick-up head. Cable Operated.

REVERSE PICK-UP HEAD SYSTEM: Allows unit to back up without damage to pick-up head

RUBBER LINED BLOWER: Driven using a fixed displacement heavy-duty hydraulic motor. Blower housing includes Tilt-N-Seal design with adjustable spring balance to ensure long life of seal. Warranty – 1 year / 1000 hours prorated.

SHOP PROP: Scissor lift safety prop designed for use in areas requiring approximately 15' of overhead clearance (on-board safety props require approximately 20' of overhead clearance).

STORAGE COMPARTMENT: 5.6 cubic feet with lockable door mounted on left side.

WATER FILL HOSE & RACK: Flexible 20-foot-long water tank fill hose with 2-1/2-inch hydrant coupling with rack mount. System incorporates air gap.

SWEEPER WARRANTY: 1 Year / 1000 Hours. Contact factory for details.

 

OPTIONAL EQUIPMENT

 

GUTTER BROOM OPTIONS:

(2) Gutter Broom Drop Down: Allows gutter broom to drop down for road surface agitation in front of pick-up head

 

DUST CONTROL SYSTEM:

(3) Additional Water Spray Nozzles: 1. Left Gutter Broom Nozzle, 2. Right Gutter Broom Nozzle, 3. Hopper Nozzle

A.O.D. (Air Operated Diaphragm) Water Pump with Wash Down Hose & Gun (Exchange):  Self-contained water supply includes single A.O.D. pump used for dust control and wash down independent from auxiliary engine with 3/4" x 25' high volume wash down hose with hose box, small fire type nozzle, spray gun with trigger control and two (2) 36" interchangeable lance lengths; Recommended for catch basin cleaning and remote washing of unit.

High Output Water: Additional nozzles and deflectors strategically located to control extreme dust

Hydrant Wrench

Water Tank Level Gauge: Indicator on BlueLogic display

 

HOPPER OPTIONS

Abrasion Protection Package: Hopper suction inlet liner; hopper suction tube liner; suction transition liner; extra heavy duty (red label) suction hose; pick-up head suction nozzle liner and pressure wear pads

External Hopper Controls: Four (4) toggle switches, located behind the access panel on the right rear of the engine compartment, used to operate the hopper during washout and service procedures. These switches individually control Engine Start/Stop, Blower RPM, Hopper Up and Down, and Hopper Tilt/Open. *These controls should NOT be used for dumping the sweeper, only cleaning and service. Always use the controls inside the cab when dumping in a container / truck or on the ground.

Hopper Load Indicators: Sensor with audible and visual indicators in cab that signals full load

Hopper Screen Vibrators - Dual: For heavy sweeping/milling application (pneumatic)

Hopper Vibrator - Electric: Attached to hopper weldment to assist dumping

Sweeper Deluge System: High volume system is mounted in the hopper with a water fill hose quick coupler for connection to a fire hydrant. Deluge port(s) on pick-up head pressure inlet (and BAH broom chamber if applicable). Connects to fire hydrant to flush pick-up head and includes 6"cleanout port.

 

PICK-UP HEAD OPTIONS:

Auto Sweep Interrupt (ASI): System designed to interrupt sweeping functions when any of several parameters are met. When set in Auto mode, the transmission gear placed in reverse and the “ASI RESET” switch being engaged are two of several parameters that can engage ASO. Auto sequence of operations is as follows for equipped and active features: 1) Auxiliary engine is idled and gutter broom(s) are stopped. 2) Dust control system is turned off. 3) Left gutter broom is raised. 4) Right gutter broom is raised. 5) Pick-up head is raised. The “ASI RESET” switch will reposition all functions to prior setting(s) and can be used as a one button start/stop switch during sweeping to interrupt / resume all sweeping functions. Several ASI features are configurable and can be enables / disabled through the BlueLogic display under the PIN protected “User Setting” tab. Some of these features are:

Overspeed Interrupt, when enabled, allows for a two-stage process to prevent sweeping at excessive speeds by warning the operator at a set configurable speed and then by activating ASI at a set configurable speed.

Reverse Trigger Bypass, when enabled, will prevent ASI from activating when the transmission is placed in reverse. This allows ASI to be activated using other triggers such as engaging the ASI RESET switch for one button start / stop sweeping.

RPM Return, when enabled, will allow ASI to return the blower RPM to the previous stetting before ASI was activated.

Pick-Up Head Curtain Lifter: Hydraulic actuated & retractable roller assembly that provides the pick-up head w/ the ability to sweep large volume of light debris. Electrically controlled in cab

Pick-Up Head Pressure Inlet Water Injection System: Gravity flow water line connected to pick-up head pressure inlet. Cab controlled on/off solenoid valve; flow regulated by manual ball valve (includes 6" cleanout port)

Removable Front Curtain Set

Skid Bumper Extension Set (3")

 

ADDITIONAL OPTIONS:

Camera/Monitor System (Three Options Below): Alliance Wireless Technology (AWTI), slim line series with 7" color monitor mounted in cab with color camera. Three Camera System: Single rear view facing camera system with two (2) additional cameras (3 cameras total). Location for second and third cameras: Pick-Up Head view from right side and Pick-Up Head view from left.

(5) Floodlight - LED (Exchange): (2) Gutter Brooms, (2) Rear, (1) Chute

(2) Floodlight - LED (Additional): (2) Pick-up Head (each side)

 

TRUCK SPECIFICATIONS

CONVENTIONAL DIESEL TRUCK

Freightliner M2-106 (33,000 lb. GVW, 158” Wheelbase)

Engine: 6.7L Cummins 200 HP Horizontal Exhaust

Transmission: Allison 2500RDS-P Automatic 6-speed

Dual Steering: Fontaine Dual Steering Package

Rear Suspension: 23,000 lb. Hendrickson (HAS 230 Air)

 

TRUCK CHASSIS OPTIONAL EQUIPMENT

Air Horn: Tied into the electric horn and mounted under the cab

Battery Disconnect Switch: Disconnects batteries for sweeper and truck.

Fire Extinguisher: Refillable, dry chemical, DOT approved, cab mounted, 5 lb. ABC rated

Hazard Reflectors: 3 triangular red reflectors

LED Traffic Directing Light (Arrow Stick): Whelen TACF85LH, SAE Class 1 (44" long)

(2)Parabolic Mirror Head (Exchange): 12" exchange with 10.5" head

(2) Inside Arm Rests

2 Speed Rear Axle

​​​​​​​