2020 Maintainer Service Body with Crane (Miller EnPak)

 

--------  Maintainer Body  --------

MTS-2-120, 62" High X 23" Deep Compartments, 14' Long Body, 12-gauge body with 11-gauge deck-plate compartment tops & backs, 54" x 31" wheel well opening. 

Galvanneal body includes Cabinets with reinforced floors, clean out drains and adjustable aluminum shelving package (250 lb. capacity),

3/16" Aluminum doors with Three Point D-ring door latches and gas spring door holders, 49"W center deck floor is 1/8" diamond plate. 

Also includes wheel skirting, front body bulkhead, rear 10" tall hinge down tailgate, mud flaps, rear body grab handles,

ICC recessed LED lights & reflectors, includes 2 rear oval strobes (Buyers SL66CA)

97dB backup alarm, and Mini I.C.C. safety kit (2.5 lb ABC fire extinguisher & hazard reflectors).

Body primed and undercoated, splatter-coating on compartment interiors.

Short Tower Crane reinforcement for MTS 1 or 2 ton service body (up to 75,000 ft*lb)

NOTE: For individual crane equip. & accessory items ie. adj. boom saddle, outrigger pkgs., body leveling pkgs., hyd. pkgs. to operate a crane or other hyd. drive components-Contact Factory

Single compartment in lieu of 2 standard compartments NOTE: For up to 59" wide compartment

(2) 45" wide front SS compartments in lieu of (3) compartments

Factory Installation of body on a chassis

     

--------  Compartment Equipment & Accessories  --------

Pressurized Storage System (PSS), 2-blowers with filters

Oxy / Act bottle storage w/ratchet strap, vents, "J" hks. & reinforced floor

14 Feet of Master Compartment Locking System for steel body. Spring loaded with padlock guards for both side packs

     

--------  Hydraulic Power Package  --------

Miller EnPak A60HGE Power Package with control panel

  24.8HP Kubota diesel engine, utilizes chassis 12-volt battery & fuel (requires two auxiliary fuel ports)

  Includes engine block heater with 120V plug-in

  Crane remote integration: Not Included / Quoted separately

  Hydraulic Pump: Closed Center /Load Sensing (10 gpm), Includes hydraulic reservoir w/ 120V heater & 3-way switch

  Air Compressor: Rotary screw 60 CFM @ 100 PSI (Air tank required, quoted separately)

  Generator: 6000 Watt, GFI outlets (1) 120V, (1) 240V Remote-mounted

  Welder: Not Included, See Maxstar welder options

  Inverter: EnVerter - 2400 Watt, with (1) 120V GFI outlet

  Jumpstart / Charger: Not included / quoted separately

  White housing; 21"W x 30"T x 47"L, 832 lbs

Note: Specify mounting location:

      -Center deck location may require a removable panel for protection

      -If mounted near fixed walls, requires a minimum of 36" width for air flow and panel access

      -If inside an enclosure, requires AO-03606 for ventilation

Air tank - 17 gallon - Pressure rating of 200 psi / 16" diameter - painted black (000012)

Includes moisture drain

Crane remote control hook-up (tethered or wireless), for engine-driven power packages

Mounting angles

     

--------  Crane Equipment & Accessories  --------

H10025ST Crane 10,000 lb max capacity (75,000 ft*lb) with hydraulic extend hex-boom 13'-25'

Crane includes a true independent proportional wireless remote, holder with storage sensor, indicator light & external antenna, ACC, planetary winch, crane hour meter,

engine start/stop, A2B, overload system, holding valves & load block with non-live-swivel safety hook.

Note: Maximum pedestal height = 31"

Paint note:

Ship-out crane-only: Requires additional paint charge

Crane installed on body: No additional paint charge unless different color than body

Install hydraulic crane on body - includes boom saddle, and valve well with HD reinforced cover

Annual crane inspection (Initial inspection)

     

--------  Outriggers & Accessories  --------

Outriggers for cranes up to 75,000 ft*lb, hydraulic up/down rear outriggers (2) with hydraulic extend in/out on crane side (48" extend)

 

     

--------  Chassis Equipment & Accessories  --------

~Camera, NagyFleet, 7" Color monitor, external mount camera with infra-red

Note: Monitor mounted to windshield (not on dash)

     

--------  Air Compressor Equipment & Accessories  --------

Hose reel access out rear compartment

Air accessory package - 1/2" X 50' Filter / lubricator / regulator, spring rewind reel 019060 (J spring), hose & ball stop

     

--------  Lighting / Electrical Equipment & Accessories  --------

~Exterior 12v LED flood light pkg. 1-perm / 1-remote

~(4) Exterior 12v LED flood light

10 Interior 12 v. LED strip light (can be used in O/A compartments)

~Strobe Lightheads Low profile L.E.D, rectangular, amber, external mount, Whelen TIR3  3.5" x 1.13" (2x-1 ea front corner) (012002 or 012513) Chassis front

~Exterior 12v LED flood light on crane boom tip (2-Lights) on pivot bracket

~Light Bar Mount (Aluminum), front of body, center deck width, tube frame, no panel

Includes paint or protective spray coating to match body layout

Light bar mounting plate, includes wire loom holders

~Light Bar, Whelen amber Lo-Profile LED mini light bar, Model MC16PA (#019873)

2-3/8"H x 16-1/2"W x 7-3/4"D, installed with switch in cab 

Note: Mounting plate not included

     

--------  Painting Equipment & Accessories  --------

14 Feet of unit painted urethane "White" color. Not a base coat/clear coat or Metallic  

Note: Includes protective spray covering on compartment fronts, bottom door frames, outside area around wheel wells, outer vertical outrigger tubes, rear bumper face & step surface

Note: Due to variations in OEM paint products and application methods, Maintainer cannot guarantee a perfect paint match on color

Note: For colors other than white additional charges will be required

14 Feet of Protective Spray Covering - MTS - cargo center deck, compartment tops & sides, front bulkhead, tail gate & extension, bumper and/or workbench area

     

--------  Roll-Out drawer and Tray Equipment & Accessories  --------

~DuaLock (5) drawer aluminum set 18"W x 18"D x (5)-4"H, (300 lb. cap. per drawer) Includes top shelf.

7" bottom space, overall height 30", #013225, Installed SS Rear

(1) Permanent Front-to-Back divider, (4) Removable Side-to-Side Dividers

DuaLock custom drawer aluminum set (300 lb. cap. Ea.) Includes top shelf

39"W x 18"D

(1) 7" H, (3) -5"H, (3)  -3" H Drawers

Location: SS 1st

Permanent & Removable Dividers will be provided but configurations vary depending on drawer width and depth

Note: Requires installation charge if applicable, specify drawer details.

Install charge for mounting drawer set (DuaLock, etc) in Maintainer compartment (EACH)

     

--------  Center Deck Equipment & Accessories  --------

(6) Flush mount "D" ring tie-downs in bed floor #003217, each

     

--------  Rear Bumper & Accessories  --------

26" steel workbench bumper with recessed step on one side, 2 side storage compartments

Includes a single mounting pocket for an optional vise / grinder mounting plate

Includes: 2 grab handles and strip light for recessed step safety, transverse bar storage (75" long, flush with floor), doors on both sides.

Includes a stainless steel rear bumper shell

Note: Hitch and trailer plug to be quoted separately

Class IV hitch receiver - 2" receiver - rated at 1,500 lbs. vert.  10,000 lbs. MGTW 

Note: customer is responsible to verify tow rating of chassis and available GVWR/GCWR remaining after loading of body and all other items.

Trailer plug-in 7-prong flat blade #007486 (RV style)

     

--------  Miscellaneous Equipment & Accessories  --------

Vise / grinder removable mounting plate HD, includes drain slots in plate

Single axle wheel well extensions (3-piece bolt-on),aluminum w/ protective spray.

Note: Kit includes flares for both sides of body

Bolt-On Riser / Skid (no tank) for engine driven power units / APU's in lieu of mounting angles

Provides better air flow and/or storage underneath, Includes mount for hydraulic reservoir

--------  Maintainer Body  --------

MTS-2-120, 62" High X 23" Deep Compartments, 14' Long Body, 12-gauge body with 11-gauge deck-plate compartment tops & backs, 54" x 31" wheel well opening. 

Galvanneal body includes Cabinets with reinforced floors, clean out drains and adjustable aluminum shelving package (250 lb. capacity),

3/16" Aluminum doors with Three Point D-ring door latches and gas spring door holders, 49"W center deck floor is 1/8" diamond plate. 

Also includes wheel skirting, front body bulkhead, rear 10" tall hinge down tailgate, mud flaps, rear body grab handles,

ICC recessed LED lights & reflectors, includes 2 rear oval strobes (Buyers SL66CA)

97dB backup alarm, and Mini I.C.C. safety kit (2.5 lb ABC fire extinguisher & hazard reflectors).

Body primed and undercoated, splatter-coating on compartment interiors.

Short Tower Crane reinforcement for MTS 1 or 2 ton service body (up to 75,000 ft*lb)

NOTE: For individual crane equip. & accessory items ie. adj. boom saddle, outrigger pkgs., body leveling pkgs., hyd. pkgs. to operate a crane or other hyd. drive components-Contact Factory

Single compartment in lieu of 2 standard compartments NOTE: For up to 59" wide compartment

(2) 45" wide front SS compartments in lieu of (3) compartments

Factory Installation of body on a chassis

     

--------  Compartment Equipment & Accessories  --------

Pressurized Storage System (PSS), 2-blowers with filters

Oxy / Act bottle storage w/ratchet strap, vents, "J" hks. & reinforced floor

14 Feet of Master Compartment Locking System for steel body. Spring loaded with padlock guards for both side packs

     

--------  Hydraulic Power Package  --------

Miller EnPak A60HGE Power Package with control panel

  24.8HP Kubota diesel engine, utilizes chassis 12-volt battery & fuel (requires two auxiliary fuel ports)

  Includes engine block heater with 120V plug-in

  Crane remote integration: Not Included / Quoted separately

  Hydraulic Pump: Closed Center /Load Sensing (10 gpm), Includes hydraulic reservoir w/ 120V heater & 3-way switch

  Air Compressor: Rotary screw 60 CFM @ 100 PSI (Air tank required, quoted separately)

  Generator: 6000 Watt, GFI outlets (1) 120V, (1) 240V Remote-mounted

  Welder: Not Included, See Maxstar welder options

  Inverter: EnVerter - 2400 Watt, with (1) 120V GFI outlet

  Jumpstart / Charger: Not included / quoted separately

  White housing; 21"W x 30"T x 47"L, 832 lbs

Note: Specify mounting location:

      -Center deck location may require a removable panel for protection

      -If mounted near fixed walls, requires a minimum of 36" width for air flow and panel access

      -If inside an enclosure, requires AO-03606 for ventilation

Air tank - 17 gallon - Pressure rating of 200 psi / 16" diameter - painted black (000012)

Includes moisture drain

Crane remote control hook-up (tethered or wireless), for engine-driven power packages

Mounting angles

     

--------  Crane Equipment & Accessories  --------

H10025ST Crane 10,000 lb max capacity (75,000 ft*lb) with hydraulic extend hex-boom 13'-25'

Crane includes a true independent proportional wireless remote, holder with storage sensor, indicator light & external antenna, ACC, planetary winch, crane hour meter,

engine start/stop, A2B, overload system, holding valves & load block with non-live-swivel safety hook.

Note: Maximum pedestal height = 31"

Paint note:

Ship-out crane-only: Requires additional paint charge

Crane installed on body: No additional paint charge unless different color than body

Install hydraulic crane on body - includes boom saddle, and valve well with HD reinforced cover

Annual crane inspection (Initial inspection)

     

--------  Outriggers & Accessories  --------

Outriggers for cranes up to 75,000 ft*lb, hydraulic up/down rear outriggers (2) with hydraulic extend in/out on crane side (48" extend)

 

     

--------  Chassis Equipment & Accessories  --------

~Camera, NagyFleet, 7" Color monitor, external mount camera with infra-red

Note: Monitor mounted to windshield (not on dash)

     

--------  Air Compressor Equipment & Accessories  --------

Hose reel access out rear compartment

Air accessory package - 1/2" X 50' Filter / lubricator / regulator, spring rewind reel 019060 (J spring), hose & ball stop

     

--------  Lighting / Electrical Equipment & Accessories  --------

~Exterior 12v LED flood light pkg. 1-perm / 1-remote

~(4) Exterior 12v LED flood light

10 Interior 12 v. LED strip light (can be used in O/A compartments)

~Strobe Lightheads Low profile L.E.D, rectangular, amber, external mount, Whelen TIR3  3.5" x 1.13" (2x-1 ea front corner) (012002 or 012513) Chassis front

~Exterior 12v LED flood light on crane boom tip (2-Lights) on pivot bracket

~Light Bar Mount (Aluminum), front of body, center deck width, tube frame, no panel

Includes paint or protective spray coating to match body layout

Light bar mounting plate, includes wire loom holders

~Light Bar, Whelen amber Lo-Profile LED mini light bar, Model MC16PA (#019873)

2-3/8"H x 16-1/2"W x 7-3/4"D, installed with switch in cab 

Note: Mounting plate not included

     

--------  Painting Equipment & Accessories  --------

14 Feet of unit painted urethane "White" color. Not a base coat/clear coat or Metallic  

Note: Includes protective spray covering on compartment fronts, bottom door frames, outside area around wheel wells, outer vertical outrigger tubes, rear bumper face & step surface

Note: Due to variations in OEM paint products and application methods, Maintainer cannot guarantee a perfect paint match on color

Note: For colors other than white additional charges will be required

14 Feet of Protective Spray Covering - MTS - cargo center deck, compartment tops & sides, front bulkhead, tail gate & extension, bumper and/or workbench area

     

--------  Roll-Out drawer and Tray Equipment & Accessories  --------

~DuaLock (5) drawer aluminum set 18"W x 18"D x (5)-4"H, (300 lb. cap. per drawer) Includes top shelf.

7" bottom space, overall height 30", #013225, Installed SS Rear

(1) Permanent Front-to-Back divider, (4) Removable Side-to-Side Dividers

DuaLock custom drawer aluminum set (300 lb. cap. Ea.) Includes top shelf

39"W x 18"D

(1) 7" H, (3) -5"H, (3)  -3" H Drawers

Location: SS 1st

Permanent & Removable Dividers will be provided but configurations vary depending on drawer width and depth

Note: Requires installation charge if applicable, specify drawer details.

Install charge for mounting drawer set (DuaLock, etc) in Maintainer compartment (EACH)

     

--------  Center Deck Equipment & Accessories  --------

(6) Flush mount "D" ring tie-downs in bed floor #003217, each

     

--------  Rear Bumper & Accessories  --------

26" steel workbench bumper with recessed step on one side, 2 side storage compartments

Includes a single mounting pocket for an optional vise / grinder mounting plate

Includes: 2 grab handles and strip light for recessed step safety, transverse bar storage (75" long, flush with floor), doors on both sides.

Includes a stainless steel rear bumper shell

Note: Hitch and trailer plug to be quoted separately

Class IV hitch receiver - 2" receiver - rated at 1,500 lbs. vert.  10,000 lbs. MGTW 

Note: customer is responsible to verify tow rating of chassis and available GVWR/GCWR remaining after loading of body and all other items.

Trailer plug-in 7-prong flat blade #007486 (RV style)

     

--------  Miscellaneous Equipment & Accessories  --------

Vise / grinder removable mounting plate HD, includes drain slots in plate

Single axle wheel well extensions (3-piece bolt-on),aluminum w/ protective spray.

Note: Kit includes flares for both sides of body

Bolt-On Riser / Skid (no tank) for engine driven power units / APU's in lieu of mounting angles

Provides better air flow and/or storage underneath, Includes mount for hydraulic reservoir