2020 Maintainer Service Body

 

Expected in stock January 2021

Maintainer Service Body

Model H6520ST-1-084 With Crane 

Mounted on a F550 4x2 Auto Chassis

 

QTY

DESCRIPTION

 

--------  Maintainer Body  --------

1

MTS-1-084, 52" High X 23" Deep Compartments, 11' Long Body, 14 / 12 Ga. Body with 14-gauge deck-plate compartment tops & back, 44" x 21" wheel well opening, fuel fill(s) recessed into body side rail.

Galvanneal body includes Cabinets with reinforced floors, clean out drains and adjustable aluminum shelving package (250 lb. capacity),

3/16" Aluminum doors with Three Point D-ring door latches and gas spring door holders, 49"W center deck floor is 1/8" diamond plate. 

Also includes wheel skirting, front body bulkhead, rear 10" tall hinge down tailgate, mud flaps, rear body grab handles,

ICC recessed LED lights & reflectors, includes 2 rear oval strobes (Buyers SL66CA)

97dB backup alarm, and Mini I.C.C. safety kit (2.5 lb ABC fire extinguisher & hazard reflectors).

Body primed and undercoated, splatter-coating on compartment interiors.

1

Short Tower Crane reinforcement for MTS 1 or 2 ton service body (up to 45,100 ft*lb)

NOTE: For individual crane equip. & accessory items ie. adj. boom saddle, outrigger pkgs., body leveling pkgs., hyd. pkgs. to operate a crane or other hyd. drive components-Contact Factory

1

Factory Installation of body on a chassis

    

 

--------  Compartment Equipment & Accessories  --------

1

Pressurized Storage System (PSS), 2-blowers with filters

1

Tall Oxy / Act bottle storage w/ratchet strap, vents, "J" hks. & reinforced floor

11

Feet of Master Compartment Locking System for steel body. Spring loaded with padlock guards for both side packs

   

    

 

--------  Hydraulic Power Package  --------

1

Closed center LS hydraulic power package, includes air shift PTO (requires chassis air system)

Includes: pump, std oil reservoir with in-tank filter, vented fill cap, sight gauge

     

 

--------  Crane Equipment & Accessories  --------

1

H6520ST Crane 6,500 lb max capacity (38,000 ft*lb) with hydraulic extend hex-boom 12'-20'

Crane includes a true independent, proportional wireless remote, holder with storage sensor & indicator light,

ACC w/ crane lifting weight display, gear winch, crane hour meter, engine start/stop, A2B, overload system,

holding valves & load block with non-live-swivel safety hook.

Paint note:

Ship-out crane-only: Requires additional paint Charge

Crane installed on body: No additional paint charge unless different color than body

1

Annual crane inspection (Initial inspection)

1

Backup cable for wireless crane remote, 35ft

022585 For TD1140 push-button remote

024685 For T150 PGT remote

1

Install hydraulic crane on body - includes boom saddle, and valve well with HD reinforced cover

  

    

 

--------  Outriggers & Accessories  --------

1

Outriggers for cranes up to 45,100 ft*lb, hydraulic up/down rear outriggers (2) with manual extend in/out on crane side (30" extend)

   

    

 

--------  Chassis Equipment & Accessories  --------

1

Spring or spacer leveling package added to one side of chassis suspension (1-Ton)

1

Add charge to standard PTO package for electric-over-hydraulic required on chassis with automatic transmission.(Ford F450-F550, F650-F750 & Ram 4500-5500)

1

Electronic engine speed control - computer set - electronic engine

1

Camera, relocate existing chassis camera to rear of body

Note: Requires factory installed monitor

     

     

 

--------  Welder / Generator / Inverter / Power Equipment  --------

1

Mounting angles

  

    

 

--------  Air Compressor Equipment & Accessories  --------

1

VMAC Predatair 40 CFM rotary screw hydraulic driven air compressor w/ white cover (Closed-Center)

40 CFM @ 150 psi with 17 gallon air tank (painted black) with moisture drain & integral hydraulic oil cooler.

Includes control panel, mounted near body's switch panel

Note: Hydraulic requirement = 14 gpm (May require large pump kit, not included),

Cold weather package included (cooler bypass), additional oil warming valve NOT available

24"L x 16.5"W x 18"H, 162 lbs

1

Air accessory package - 1/2" X 50' Filter / lubricator / regulator, spring rewind reel 022671 (J spring), hose & ball stop

1

Hose reel access (fiber box)

1

Air reel (1/2"x50') to be mounted in ST crane compartment

     

  

 

--------  Lighting / Electrical Equipment & Accessories  --------

1

~Exterior 12v LED flood light pkg. 1-perm 022232 / 1-remote 022233 (2,100 lumens)

4

~Exterior 12v LED flood light 022232 (2,100 lumens)

8

Interior 12 v. LED strip light (can be used in O/A compartments)

1

~Strobe Lightheads Low profile L.E.D, rectangular, amber, external mount, Whelen TIR3  3.5" x 1.13" (2x-1 ea front corner) Front chassis grille in addition to standard rear strobes

012002 for vertical mount applications / 012513 for horizontal mount applications

1

Light Bar mount (22"), drill free roof top chassis cab (ACARI)

Utilizes rear brake light mounting & wiring

1

~Light Bar, Whelen amber Lo-Profile LED mini light bar, Model MC16PA (#019873)

2-3/8"H x 16-1/2"W x 7-3/4"D, installed with switch in cab 

Note: Mounting plate not included

     

 

--------  Painting Equipment & Accessories  --------

11

Feet of unit painted urethane "White" color. Not a base coat/clear coat or Metallic  

Note: Includes protective spray covering on compartment fronts, bottom door frames, outside area around wheel wells, outer vertical outrigger tubes, rear bumper face & step surface

Note: Due to variations in OEM paint products and application methods, Maintainer cannot guarantee a perfect paint match on color

Note: For colors other than white additional charges will be required

11

Feet of Protective Spray Covering - MTS - cargo center deck, compartment tops & sides, front bulkhead, tail gate & extension, bumper and/or workbench area


     

 

--------  Roll-Out drawer and Tray Equipment & Accessories  --------

1

~DuaLock (5) drawer aluminum set 18"W x 18"D x (5)-4"H, (300 lb. cap. per drawer) Includes top shelf

7" bottom space, overall height 30", #013225, Installed

(1) Permanent Front-to-Back divider, (4) Removable Side-to-Side Dividers

1

~DuaLock (7) drawer aluminum set 29"W x 18"D x (1)-7", (3)-5", (3)-3"H, (300 lb. cap. per drawer) Includes top shelf

7" bottom space, overall height 41.50", #020017, Installed

(2) Permanent Side-to-Side Dividers, Removable Front-to-Back Dividers

 

    

    

 

--------  Center Deck Equipment & Accessories  --------

4

Flush mount "D" ring tie-downs in bed floor #003217, each

     

 

--------  Rear Bumper & Accessories  --------

1

26" steel workbench bumper with recessed step on one side, 2 side storage compartments

Includes a single mounting pocket for an optional vise / grinder mounting plate

Includes: 2 grab handles and strip light for recessed step safety, transverse bar storage (75" long, flush with floor), doors on both sides.

Includes a stainless steel rear bumper shell

Note: Hitch and trailer plug to be quoted separately

1

Class IV hitch receiver - 2" receiver - rated at 1,500 lbs. vert.  10,000 lbs. MGTW 

Note: customer is responsible to verify tow rating of chassis and available GVWR/GCWR remaining after loading of body and all other items.

1

Trailer plug-in 7-prong flat blade #007486 (RV style)

    

 

--------  Miscellaneous Equipment & Accessories  --------

1

Vise / grinder removable mounting plate HD, includes drain slots in plate

 

Expected in stock January 2021

Maintainer Service Body

Model H6520ST-1-084 With Crane 

Mounted on a F550 4x2 Auto Chassis

 

QTY

DESCRIPTION

 

--------  Maintainer Body  --------

1

MTS-1-084, 52" High X 23" Deep Compartments, 11' Long Body, 14 / 12 Ga. Body with 14-gauge deck-plate compartment tops & back, 44" x 21" wheel well opening, fuel fill(s) recessed into body side rail.

Galvanneal body includes Cabinets with reinforced floors, clean out drains and adjustable aluminum shelving package (250 lb. capacity),

3/16" Aluminum doors with Three Point D-ring door latches and gas spring door holders, 49"W center deck floor is 1/8" diamond plate. 

Also includes wheel skirting, front body bulkhead, rear 10" tall hinge down tailgate, mud flaps, rear body grab handles,

ICC recessed LED lights & reflectors, includes 2 rear oval strobes (Buyers SL66CA)

97dB backup alarm, and Mini I.C.C. safety kit (2.5 lb ABC fire extinguisher & hazard reflectors).

Body primed and undercoated, splatter-coating on compartment interiors.

1

Short Tower Crane reinforcement for MTS 1 or 2 ton service body (up to 45,100 ft*lb)

NOTE: For individual crane equip. & accessory items ie. adj. boom saddle, outrigger pkgs., body leveling pkgs., hyd. pkgs. to operate a crane or other hyd. drive components-Contact Factory

1

Factory Installation of body on a chassis

    

 

--------  Compartment Equipment & Accessories  --------

1

Pressurized Storage System (PSS), 2-blowers with filters

1

Tall Oxy / Act bottle storage w/ratchet strap, vents, "J" hks. & reinforced floor

11

Feet of Master Compartment Locking System for steel body. Spring loaded with padlock guards for both side packs

   

    

 

--------  Hydraulic Power Package  --------

1

Closed center LS hydraulic power package, includes air shift PTO (requires chassis air system)

Includes: pump, std oil reservoir with in-tank filter, vented fill cap, sight gauge

     

 

--------  Crane Equipment & Accessories  --------

1

H6520ST Crane 6,500 lb max capacity (38,000 ft*lb) with hydraulic extend hex-boom 12'-20'

Crane includes a true independent, proportional wireless remote, holder with storage sensor & indicator light,

ACC w/ crane lifting weight display, gear winch, crane hour meter, engine start/stop, A2B, overload system,

holding valves & load block with non-live-swivel safety hook.

Paint note:

Ship-out crane-only: Requires additional paint Charge

Crane installed on body: No additional paint charge unless different color than body

1

Annual crane inspection (Initial inspection)

1

Backup cable for wireless crane remote, 35ft

022585 For TD1140 push-button remote

024685 For T150 PGT remote

1

Install hydraulic crane on body - includes boom saddle, and valve well with HD reinforced cover

  

    

 

--------  Outriggers & Accessories  --------

1

Outriggers for cranes up to 45,100 ft*lb, hydraulic up/down rear outriggers (2) with manual extend in/out on crane side (30" extend)

   

    

 

--------  Chassis Equipment & Accessories  --------

1

Spring or spacer leveling package added to one side of chassis suspension (1-Ton)

1

Add charge to standard PTO package for electric-over-hydraulic required on chassis with automatic transmission.(Ford F450-F550, F650-F750 & Ram 4500-5500)

1

Electronic engine speed control - computer set - electronic engine

1

Camera, relocate existing chassis camera to rear of body

Note: Requires factory installed monitor

     

     

 

--------  Welder / Generator / Inverter / Power Equipment  --------

1

Mounting angles

  

    

 

--------  Air Compressor Equipment & Accessories  --------

1

VMAC Predatair 40 CFM rotary screw hydraulic driven air compressor w/ white cover (Closed-Center)

40 CFM @ 150 psi with 17 gallon air tank (painted black) with moisture drain & integral hydraulic oil cooler.

Includes control panel, mounted near body's switch panel

Note: Hydraulic requirement = 14 gpm (May require large pump kit, not included),

Cold weather package included (cooler bypass), additional oil warming valve NOT available

24"L x 16.5"W x 18"H, 162 lbs

1

Air accessory package - 1/2" X 50' Filter / lubricator / regulator, spring rewind reel 022671 (J spring), hose & ball stop

1

Hose reel access (fiber box)

1

Air reel (1/2"x50') to be mounted in ST crane compartment

     

  

 

--------  Lighting / Electrical Equipment & Accessories  --------

1

~Exterior 12v LED flood light pkg. 1-perm 022232 / 1-remote 022233 (2,100 lumens)

4

~Exterior 12v LED flood light 022232 (2,100 lumens)

8

Interior 12 v. LED strip light (can be used in O/A compartments)

1

~Strobe Lightheads Low profile L.E.D, rectangular, amber, external mount, Whelen TIR3  3.5" x 1.13" (2x-1 ea front corner) Front chassis grille in addition to standard rear strobes

012002 for vertical mount applications / 012513 for horizontal mount applications

1

Light Bar mount (22"), drill free roof top chassis cab (ACARI)

Utilizes rear brake light mounting & wiring

1

~Light Bar, Whelen amber Lo-Profile LED mini light bar, Model MC16PA (#019873)

2-3/8"H x 16-1/2"W x 7-3/4"D, installed with switch in cab 

Note: Mounting plate not included

     

 

--------  Painting Equipment & Accessories  --------

11

Feet of unit painted urethane "White" color. Not a base coat/clear coat or Metallic  

Note: Includes protective spray covering on compartment fronts, bottom door frames, outside area around wheel wells, outer vertical outrigger tubes, rear bumper face & step surface

Note: Due to variations in OEM paint products and application methods, Maintainer cannot guarantee a perfect paint match on color

Note: For colors other than white additional charges will be required

11

Feet of Protective Spray Covering - MTS - cargo center deck, compartment tops & sides, front bulkhead, tail gate & extension, bumper and/or workbench area


     

 

--------  Roll-Out drawer and Tray Equipment & Accessories  --------

1

~DuaLock (5) drawer aluminum set 18"W x 18"D x (5)-4"H, (300 lb. cap. per drawer) Includes top shelf

7" bottom space, overall height 30", #013225, Installed

(1) Permanent Front-to-Back divider, (4) Removable Side-to-Side Dividers

1

~DuaLock (7) drawer aluminum set 29"W x 18"D x (1)-7", (3)-5", (3)-3"H, (300 lb. cap. per drawer) Includes top shelf

7" bottom space, overall height 41.50", #020017, Installed

(2) Permanent Side-to-Side Dividers, Removable Front-to-Back Dividers

 

    

    

 

--------  Center Deck Equipment & Accessories  --------

4

Flush mount "D" ring tie-downs in bed floor #003217, each

     

 

--------  Rear Bumper & Accessories  --------

1

26" steel workbench bumper with recessed step on one side, 2 side storage compartments

Includes a single mounting pocket for an optional vise / grinder mounting plate

Includes: 2 grab handles and strip light for recessed step safety, transverse bar storage (75" long, flush with floor), doors on both sides.

Includes a stainless steel rear bumper shell

Note: Hitch and trailer plug to be quoted separately

1

Class IV hitch receiver - 2" receiver - rated at 1,500 lbs. vert.  10,000 lbs. MGTW 

Note: customer is responsible to verify tow rating of chassis and available GVWR/GCWR remaining after loading of body and all other items.

1

Trailer plug-in 7-prong flat blade #007486 (RV style)

    

 

--------  Miscellaneous Equipment & Accessories  --------

1

Vise / grinder removable mounting plate HD, includes drain slots in plate